Rockwell Automation Publication 193-UM014C-EN-P - August 2016 49
Chapter 5
View and Configure Parameters
Introduction
This chapter tells you how to view and configure parameters for a DeviceNet
device that supports the full implementation of the Parameter Object.
View and Edit
The EtherNet/IP communication auxiliary module can view and configure
parameters for a DeviceNet device that supports the full implementation of the
Parameter Object. You can use the web interface to view and edit parameters
for a DeviceNet Module in the scan list.
Follow the listed steps to view and edit parameters by using the web interface of
the EtherNet/IP communication auxiliary module.
1. Enable the EtherNet/IP Communication Auxiliary Web Server
(page 33
), navigate to Scan List>Configuration, and select the
DeviceNet device folder to view or edit its parameters. The selected
DeviceNet device folder expands.
To Next Page
Loading...
