62 Rockwell Automation Publication 193-UM014C-EN-P - August 2016
Chapter 7 Automation Controller Communication
8. Click OK at the next window to have RSLogix 5000 create the
predefined tags. The EtherNet/IP communication auxiliary module
now shows as a module in the I/O Configuration folder.
Accessing Module Data with Add-on Profiles
With both the Logix controller and EtherNet/IP network configured, the
Logix controller can exchange data with the EtherNet/IP communication
auxiliary module.
1. Open the Controller Tags window.
2. Select the Monitor Tags tab.
In the preceding example, the predefined input and output tags were generated
for each of the six scanned devices. Use the output tags to control the output
relays for the scanned device. Use the input tags for diagnostic information
from the device.
To Next Page
Loading...
