Rockwell Automation Publication 193-UM014C-EN-P - August 2016 61
Automation Controller Communication Chapter 7
4. Enter a name for the EtherNet/IP communication auxiliary module.
The name creates tags in RSLogix 5000 that can be used to read and
write data from DeviceNet modules being scanned by the EtherNet/IP
communication auxiliary module.
5. Enter the IP address of the EtherNet/IP communication auxiliary
module.
6. Select Change to select a motor protection device with predefined tag
names for Data Mapping. For non-motor protection devices, select
Generic.
Predefined tag names exist for the E3 Plus EC1, EC2, EC3, EC4, and EC-5
models and the 825-P Overload Relay.
7. Select the appropriate data format, then click OK.
To Next Page
Loading...
