Allen-Bradley 193-DNENCAT - Chapter 6 Automatic Device Recovery or Replace; Introduction and Configuration

Rockwell Automation Publication 193-UM014C-EN-P - August 2016 53
Chapter 6
Automatic Device Recovery or Replace
Introduction
This chapter explains how to use the Automatic Device Recovery or Replace
(ADR) feature. Using this feature reduces downtime if you need to replace a
device.
With the ADR feature, you do not need software tools to get a replacement
device configured and online. The EtherNet/IP communication auxiliary
module automatically configures the replacement device if the device was listed
in the scan list and the appropriate electronic keying was selected.
Configuring Automatic
Device Recovery or Replace
1. Navigate to Scan List>Configuration>Advanced.
2. Select the appropriate electronic keying for your DeviceNet network
application.
IMPORTANT Not all DeviceNet devices support Automatic Device Recovery or Replace.