Rockwell Automation Publication 193-UM014C-EN-P - August 2016 93
Appendix B
EtherNet/IP and DeviceNet Information
Electronic Data Sheet (EDS)
Files
EDS files are specially formatted ASCII files that provide all of the
information necessary for a configuration tool (for example, RSNetWorx™ for
EtherNet/IP) to access and alter the parameters of a device. The EDS file
contains all the parameter information of a device: number of parameters,
groupings, parameter name, min, max, and default values, units, data format
and scaling. The EDS file for the EtherNet/IP communication auxiliary
module is available from the Internet at www.ab.com/networks/eds/
index.html. You can also obtain it from the EtherNet/IP communication
auxiliary module’s internal web page.
Common Industrial Protocol
(CIP) Objects
The following CIP object classes are supported.
Table 30 - CIP Object Classes
Identity Object — CLASS CODE 0x01
The following class attributes are supported for the Identity Object.
Table 31 - Identity Object Class Attributes
Identity Object instances contain the following instance attributes.
Class Object EtherNet/IP DeviceNet
0x01 Identity X X
0x02 Message Router X X
0x03 DeviceNet X
0x04 Assembly X X
0x05 Connection X
0x06 Connection Manager X
0x0F Parameter X X
0x47 Device Level Ring Object X
0x48 Q05 Object X
0xA1 Non-Volatile Storage Object X X
0xF4 Port Object X X
0xF5 TCP/IP Interface X
0xF6 Ethernet Link X
Attribute ID Access Rule Name Data Type Value
1 Get Revision UINT 0x0001
2 Get Max. Instance UINT 0x00011
To Next Page
Loading...
