Allen-Bradley 193-DNENCAT - Assembly Object - CLASS CODE 0 X04

Rockwell Automation Publication 193-UM014C-EN-P - August 2016 95
EtherNet/IP and DeviceNet Information Appendix B
Table 35 - Single Instance of the DeviceNet Object
The following services are implemented for the DeviceNet Object.
Table 36 - DeviceNet Object Common Services
Assembly Object — CLASS CODE 0x04
The following class attributes are supported for the Assembly Object.
Table 37 - Assembly Object Class Attributes
Instance Attributes
Instances/Connection points implements the following data attributes.
Table 38 - Instance Attributes
Output Assemblies
The following output assembly instances are implemented.
Table 39 - Instance 100
Attribute ID Access Rule Name Data Type Value
1 Get/Set Node Address USINT 0-63
2 Get/Set Baud Rate USINT
0=125K
1=250K
2=500K
13 Get Active Node Table Array of BOOL [64]
Identifies which nodes
are online on the local
network based on the
node address.
Service Code
Implemented for:
Service Name
Class Instance
0x0E Yes Yes Get Attribute Single
0x10 No Yes Set Attribute Single
Attribute ID Access Rule Name Data Type Value
2 Get Max. Instance UINT 120
Attribute ID Access Name Type Value Description
3 Get/Set Data Array of UINT — Data produced/consumed by the module
Byte Size Contents
Scan List I/O Size Data to be delivered to the first scan list entry.
Scan List I/O Size Data to be delivered to the second scan list entry.
Scan List I/O Size Data to be delivered to the third scan list entry.
Scan List I/O Size Data to be delivered to the fourth scan list entry.
Scan List I/O Size Data to be delivered to the fifth scan list entry.
Scan List I/O Size Data to be delivered to the sixth scan list entry.