Allen-Bradley ControlLogix Reference Manual

Chapter 5
Module Configuration Attributes
494 Rockwell Automation Publication MOTION-RM003I-EN-P - February 2018
indexed elements of this array correspond to axis instances 1 thru 8. Array
elements that are not applicable or configured are set to 0.
See also
Module Axis Attributes on page 474
Module Configuration Attributes on page 471

Allen-Bradley ControlLogix Specifications

General

Communication	EtherNet/IP, ControlNet, DeviceNet, DH+
I/O Capacity	Up to 128, 000 I/O points (varies by configuration)
Redundancy	Supported (with specific modules)
Programming Software	Rockwell Automation Studio 5000 Logix Designer
Operating Temperature	0°C to 60°C (32°F to 140°F)
Programming Languages	Ladder Logic, Function Block Diagram, Structured Text, Sequential Function Chart
Modularity	Yes
Certifications	UL, CE
Processor Type	Multiple options available, including standard, safety, and extreme environment processors
Power Supply	Multiple options available, including standard and redundant power supplies with various voltage ranges (e.g., 24V DC, 120/240V AC)