Need help?Do you have a question about the Allen-Bradley ControlLogix and is the answer not in the manual?
General| Communication | EtherNet/IP, ControlNet, DeviceNet, DH+ |
|---|---|
| I/O Capacity | Up to 128, 000 I/O points (varies by configuration) |
| Redundancy | Supported (with specific modules) |
| Programming Software | Rockwell Automation Studio 5000 Logix Designer |
| Operating Temperature | 0°C to 60°C (32°F to 140°F) |
| Programming Languages | Ladder Logic, Function Block Diagram, Structured Text, Sequential Function Chart |
| Modularity | Yes |
| Certifications | UL, CE |
| Processor Type | Multiple options available, including standard, safety, and extreme environment processors |
| Power Supply | Multiple options available, including standard and redundant power supplies with various voltage ranges (e.g., 24V DC, 120/240V AC) |
Covers scheduling the network, verifying properties, and testing communication.
Details configuring the PLC-5C to receive data and testing the communication.
Guides configuring the ControlNet network, PLC-5C, and Logix5550 consumer.
Details creating the PLC-5C producer application and scheduling the network.
Guides system setup, application creation, and ladder program development.
Details downloading the program and testing the message bridging.
Guides adding local and remote CNB modules and I/O modules to the configuration.
Details editing tags, creating ladder logic, downloading, and scheduling the network.
Guides adding a second remote CNB module and analog I/O to the network.
Details editing tags, modifying logic, downloading, and scheduling the expanded network.
To Next Page
