Allen-Bradley ControlLogix User Manual

1756-6.5.3 - December 1999
Logix5550 Controller to PLC-5C: Scheduled Communications 6-5
Create the Producer Ladder Program
1. Double-click on Main Routine under the Main Program folder, and
create the following ladder program:
For two-way communication you can also configure a consumed tag for this
controller. See chapter 8 for details.
See Appendix B and the Logix5550 Controller User Manual, publication
1756-6.5.12, for more information on creating produced and consumed
tags.

Allen-Bradley ControlLogix Specifications

General

Communication	EtherNet/IP, ControlNet, DeviceNet, DH+
I/O Capacity	Up to 128, 000 I/O points (varies by configuration)
Redundancy	Supported (with specific modules)
Programming Software	Rockwell Automation Studio 5000 Logix Designer
Operating Temperature	0°C to 60°C (32°F to 140°F)
Programming Languages	Ladder Logic, Function Block Diagram, Structured Text, Sequential Function Chart
Modularity	Yes
Certifications	UL, CE
Processor Type	Multiple options available, including standard, safety, and extreme environment processors
Power Supply	Multiple options available, including standard and redundant power supplies with various voltage ranges (e.g., 24V DC, 120/240V AC)