Allen-Bradley ControlLogix User Manual

1756-6.5.3 - December 1999
6-4 Logix5550 Controller to PLC-5C: Scheduled Communications
3. Produce the tag that is being sent. Either:
Check the “P” box in the tag database:
-OR-
Right-click on the tag and select Edit Tag Properties.
The Tag Properties window will appear:
4. Check the “Produce this tag for up to” box and select the number of
consumers (1 to 256). The default is 2.
Check the “P” box in the tag database
to make this a produced tag.
Make sure this box is checked.

Allen-Bradley ControlLogix Specifications

General

Communication	EtherNet/IP, ControlNet, DeviceNet, DH+
I/O Capacity	Up to 128, 000 I/O points (varies by configuration)
Redundancy	Supported (with specific modules)
Programming Software	Rockwell Automation Studio 5000 Logix Designer
Operating Temperature	0°C to 60°C (32°F to 140°F)
Programming Languages	Ladder Logic, Function Block Diagram, Structured Text, Sequential Function Chart
Modularity	Yes
Certifications	UL, CE
Processor Type	Multiple options available, including standard, safety, and extreme environment processors
Power Supply	Multiple options available, including standard and redundant power supplies with various voltage ranges (e.g., 24V DC, 120/240V AC)