1756-6.5.3 - December 1999
Chapter
11
Adding an I/O Chassis to an Existing
ControlNet Network
About the Example Application
Each 1756-CNB interface module can support up to 64 bidirectional
connections. This example application expands the ControlNet network
from the previous chapter by adding another remote I/O chassis. The new
remote chassis contains another “child” 1756-CNB module (configured as
node 3) in slot 0 and an analog output module in slot 1. The ladder program
of the previous chapter is modified to produce a varying signal at one of the
analog output channels. Note that these changes do not affect the operation
of the digital I/O modules in the first remote chassis.
What you will do See page
Set Up the Example Application 11-2
Create the Example Application 11-2
Add the Second Remote 1756-CNB Module to the I/O
Configuration
11-3
Add the Remote Analog I/O Module to the I/O
Configuration
11-5
Edit the Controller Tags 11-9
Modify the Ladder Program 11-10
Download the Program 11-10
Schedule the Network Using RSNetWorx for ControlNet 11-11
Test the Example Application 11-16
To Next Page
Loading...
