1756-6.5.3 - December 1999
PLC-5C to Logix5550 Controller: Unscheduled Messaging 7-5
Download the PLC-5C Program
1. From the Comms menu, select System Communications.
The System Options window will appear with the System
Communications tab open.
2. Select AB_KTC-1 as the Driver and click on Who Active.
The RSWho window will appear (Your window may appear different,
depending on the drivers and devices installed on your system).
3. Double-click on the PLC-5 processor at node 11 (1785-L40C15 in this
example).
To Next Page
Loading...
