Allen-Bradley ControlLogix User Manual

1756-6.5.3 - December 1999
PLC-5C to PLC-5C Unscheduled Messaging Over Two ControlNet Networks 9-5
Download the Program
1. From the Comms menu, select System Communications.
The System Options window will appear with the System
Communications tab open.
2. Select AB_KTC-1 as the Driver and click on Who Active.
The RSWho window will appear (Your window may appear different
depending upon the drivers and other devices you have installed).
3. Double-click on the PLC-5/40C processor at node 11.
4. When the System Communications tab reappears, click on the
Download button.

Allen-Bradley ControlLogix Specifications

General

Communication	EtherNet/IP, ControlNet, DeviceNet, DH+
I/O Capacity	Up to 128, 000 I/O points (varies by configuration)
Redundancy	Supported (with specific modules)
Programming Software	Rockwell Automation Studio 5000 Logix Designer
Operating Temperature	0°C to 60°C (32°F to 140°F)
Programming Languages	Ladder Logic, Function Block Diagram, Structured Text, Sequential Function Chart
Modularity	Yes
Certifications	UL, CE
Processor Type	Multiple options available, including standard, safety, and extreme environment processors
Power Supply	Multiple options available, including standard and redundant power supplies with various voltage ranges (e.g., 24V DC, 120/240V AC)