Allen-Bradley MicroLogix 1100 Instruction Set Reference Manual

Publication 1763-RM001B-EN-P - April 2007
Communications Instructions 421
• Email Server : email Server IP Address or DNS name. As for the
input of DNS name, you should make sure if the Default Domain
Name has been configured in the Ethernet Channel Configuration. If
it was configured in the Ethernet Channel Configuration, DNS
Sub-system will query total DNS name to DNS server. For example,
you entered “dnsname” on this entry and “default.com” is
configured in the Default Domain Name of the Ethernet Channel
Configuration, DNS sub-system will query “dnsname.default.com” to
the DNS server.
• FROM Address : email From Address. From Address must be
written as an email style.
• Authentication : Disable or Enable. Disable is a default value. If
this flag is disabled, “User Name” and “Password” tab is changed to
non-editable.
• User Name : User Name registered in the SMTP server. According to
the SMTP server, Username must be written as an email style.
• Password : Password registered in the SMTP server.
• TO Address [0] : email TO address [0]. To Address must be written
as an email style.
• TO Address [1] : email TO Address [1]. To Address must be written
as an email style.
• TO Address [2] : email TO Address [2]. To Address must be written
as an email style.
• TO Address [3] : email TO Address [3]. To Address must be written
as an email style.
• TO Address [4] : email TO Address [4]. To Address must be written
as an email style.
• TO Address [5] : email TO Address [5]. To Address must be written
as an email style.
• TO Address [6] : email TO Address [6]. To Address must be written
as an email style.
• TO Address [7] : email TO Address [7]. To Address must be written
as an email style.
• TO Address [8] : email TO Address [8]. To Address must be written
as an email style.
• TO Address [9] : email TO Address [9]. To Address must be written
as an email style.
A user can not edit LEN (=Length) fields in the SMTP Configuration File. If
String Text is entered, RSLogix500 updated the Length fields automatically.
These parameters are non-editable in RUN mode. You can change them in
offline or in online PROGRAM mode. Maximum of the characters for the
string parameters are 62 bytes.
efesotomasyon.com - Allen Bradley,Rockwell,plc,servo,drive

Allen-Bradley MicroLogix 1100 Specifications

General

Brand	Allen-Bradley
Model	MicroLogix 1100
Category	Controller
Language	English