Publication 1763-RM001B-EN-P - April 2007
Communications Instructions 425
Inline Indirection in String File for Subject and Body
For e-mail subject and body, user can use Inline Indirection functionality.
In the previous General MSG setup screen, e-mail subject is ST70:0 and
body is ST70:1. If user write "SMTP BODY 0 [N7:0]" in String File, "[N7:0]"
is replaced to String of the value of N7:0.
SMTP Authentication Encoding
If the SMTP Authentication Flag is enabled, MicroLogix 1100 sends
encoded Username and Password. There are several Authentication
methods; login, plain, cram-md5, and etc. But, MicroLogix 1100 supports
only the login method. Base64 encoding is used to login to SMTP server.
Sending email in User Fault Routine
When the controller mode is changed to User Fault mode, if users want to
send email, user fault routine must be defined in the word 29(Fault
Routine S2:29) of System Status File. SMTP MSG instruction must be used
in the configured Fault Routine also.
Configuration for sending email in UFR
efesotomasyon.com - Allen Bradley,Rockwell,plc,servo,drive
To Next Page
Loading...
Need help?
General
