Allen-Bradley PowerFlex 755 User Manual

250 Rockwell Automation Publication MOTION-UM003K-EN-P - January 2019
Chapter 11 Commission an Axis
Access Motion Direct Commands for an Axis or Group
To access the Motion Direct Commands for the Motion Group or axis, right-
click the Group or Axis in the Controller Organizer and choose Motion Direct
Commands.
Figure 106 - Motion Direct Commands Dialog Box
The content of the Motion Direct Command dialog box varies, depending on
the command you have chosen. In the Command list, you can either type the
mnemonic and the list advances to the closest match or you can choose a
command from the Axis pull-down menu. Choose the desired command and
its dialog box appears.

Allen-Bradley PowerFlex 755 Specifications

General

Category	AC Drive
Amperage	2.2…1470 A
Output Voltage	0 to Input Voltage
Output Current	2.2…1470 A
Enclosure	IP20, IP30, IP54
Communications	EtherNet/IP, ControlNet, DeviceNet
I/O	Digital, Analog, Encoder, Relay
Safety	Safe Speed Monitor
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overload, Short Circuit, Ground Fault, Overtemperature
Operating Temperature	-10°C to 50°C (14°F to 122°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Humidity	5…95% noncondensing
Altitude	Up to 1000m (3300ft) without derating
Voltage	200-240V AC, 380-480V AC, 500-600V AC, 690V AC
Input Voltage	200-240V AC, 380-480V AC, 500-600V AC, 690V AC
Control Method	Sensorless Vector