Allen-Bradley PowerFlex 755 User Manual

Rockwell Automation Publication MOTION-UM003K-EN-P - January 2019 255
Chapter 12
Homing
Homing puts your equipment at a specific starting point for operation. This
starting point is called the home position. Typically, you home your equipment
when you reset it for operation.
When using integrated motion on the EtherNet/IP™ network, all active and
passive homes are setting absolute positions as long as an absolute device is
being used.
See the Integrated Motion on the EtherNet/IP network Reference Manual,
publication MOTION-RM003
, for more details about the Homing attributes.
Topic Page
Guidelines for Homing 256
Examples 258
Absolute Position Recovery (APR) 262
Absolute Feedback Device 263
APR Faults 269

Allen-Bradley PowerFlex 755 Specifications

General

Category	AC Drive
Amperage	2.2…1470 A
Output Voltage	0 to Input Voltage
Output Current	2.2…1470 A
Enclosure	IP20, IP30, IP54
Communications	EtherNet/IP, ControlNet, DeviceNet
I/O	Digital, Analog, Encoder, Relay
Safety	Safe Speed Monitor
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overload, Short Circuit, Ground Fault, Overtemperature
Operating Temperature	-10°C to 50°C (14°F to 122°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Humidity	5…95% noncondensing
Altitude	Up to 1000m (3300ft) without derating
Voltage	200-240V AC, 380-480V AC, 500-600V AC, 690V AC
Input Voltage	200-240V AC, 380-480V AC, 500-600V AC, 690V AC
Control Method	Sensorless Vector