Maintenance cycles and intervals
760.0002 GB - 150 500
BA-2011.11
Series AE1F, AE1L, AE.E, AE.N, AE.H, AE.V, AED1E,
AED2N ID, ZD construction types
21
8 Maintenance cycles and
intervals
Maintenance may be necessary for the
following parts:
rotor + stator: Wear to the rotor and/or stator is
manifested in the form of lower pump capacity
and lower pressure. Maintenance can be
planned when this is noticed, i.e. it is not
necessary to immediately replace the rotor
and/or stator.
For detailed information about maintenance
procedures and intervals for other
components, please refer to section 9, page 22
and section 10, page 26 .
To Next Page