Safety
Dangers of failure to observe safety notices
760.0002 GB - 150 500
BA-2011.11
Series AE1F, AE1L, AE.E, AE.N, AE.H, AE.V, AED1E,
AED2N ID, ZD construction types
3
2 Safety
The operating instructions contain important
notices that must be observed during set-up,
operation, and maintenance. For this reason,
the installer and all technical
personnel/operators must read these operating
instructions before installation and operation;
these instructions must remain with the
machine/system at all times. In addition to the
general safety notices listed under this main
section "Safety", all special safety notices
inserted below the other main points, such as
notices applicable to private usage, must also
be observed.
2.1 Dangers of failure to observe
safety notices
Failure to observe the safety notices can result
in dangers for people and the environment as
well damage to the machine. Failure to
observe safety notices will lead to loss of all
damage compensation claims.
In particular, failure to observe safety notices
may result in the following dangers:
• Failure of important functions on the
machine/system
• Failure of required methods for
maintenance and repair.
• Danger of injury from electrical,
mechanical, and chemical hazards.
• Environmental damages caused by
escape of hazardous materials.
2.2 Proper use
The pump as well as its parts and modules
may be used only for their intended purposes.
Any other or additional usage is improper
usage. ALLWEILER will not be liable for any
resulting damages.
Proper use also refers to observation of all
notices in the operating instructions and
completion of inspection and maintenance
tasks.
Use only original spare parts, wearing parts,
and accessories. These parts are designed
specifically for the system. There is no
assurance that third-party parts are designed
to withstand operating loads and safety
specifications.
We do not approve the use of any parts or
special equipment that we did not deliver.
2.3 Avoiding common mistakes
(examples)
• Always observe the pump’s operational
limits regarding temperature, pressure,
capacity, viscosity, and speed.
( order data sheet)
• If pumping liquids loaded with solids,
comply with limitations on the proportion of
solids and grain size.
( order data sheet, technical description)
• If using auxiliary operating systems,
ensure a permanent supply of the required
operating liquid.
2.4 General safety notices
2.4.1 Product safety
The pump was built according to the current
state of technology and recognized safety
regulations. Despite this, dangers to life and
limb of the user or other persons or damage to
the pump or other property remain possible.
• Operate the pump in accordance with
these instructions and in a technically
flawless condition and use it only in the
proper manner with awareness of safety
and dangers.
• Keep these instructions and related
documents in their entirety in readable
condition and keep them available at all
times.
• Prohibit any activity that will endanger your
employees or unrelated third parties.
• In the event of a potentially dangerous
failure of the pump, stop the pump
immediately and have the disturbance
removed by the responsible person.
• In addition to the documentation, comply
with all legal and other safety and
accident-prevention regulations as well as
applicable standards and directives in the
country of operation.
To Next Page
Loading...
