Table 4-22 Jumper Settings for Working Mode of ENET1 (U9)
Table 4-23 Pin Assignments for Fast Ethernet
Interrupt open drain output 1
Parallel LED output of 100BASE-TX link 1
Management data clock reference 1
GMII and MII receive clock 1
GMII and MII carrier sense 1
GMII and MII receive data[0] 1
GMII and MII receive data[1] 1
GMII and MII receive data[2] 1
GMII and MII receive data[3] 1
GMII and MII receive data valid 1
GMII and MII receive error 1
GMII and MII transmit enable 1
GMII and MII transmit error 1
Interrupt open drain output 2
Parallel LED output of 100BASE-TX link 2
Management data clock reference 2
GMII and MII receive clock 2
GMII and MII carrier sense 2
GMII and MII receive data[0] 2
GMII and MII receive data[1] 2
GMII and MII receive data[2] 2
GMII and MII receive data[3] 2
GMII and MII receive data valid 2
GMII and MII receive error 2
To Next Page
Loading...
