5000KIT | 5000KIT AUTOMATION SET88
WARRANTY OBLIGATIONS
12. WARRANTY OBLIGATIONS
• The operational capacity of the product is guaranteed only when the rules governing
its storage, transportation, adjustment, operation are followed; when mounting and
maintenance (timely and due) is performed by an organisation, specialising in the sphere
of automation and authorised to perform mounting and maintenance operations.
• The warranty period is __________________ and starts from the date of product delivery
to the Customer or from the production date, when the delivery date is not known.
• During the warranty period any defects, caused by the Manufacturer, are repaired by the
service department, providing warranty maintenance.
Note: the parts, replaced by the service department, performing the product repair,
become the department’s property.
• Warranty is not applied in the following cases:
− violation of storage, transportation, operation and mounting rules;
− mounting, adjustment, repair, re-mounting or modification of the product by persons,
not authorised to perform such works;
− damage of the product, resulting from unstable working of the power supply system
or non-compliance of the power supply system with the values, established by the
Manufacturer;
− damage of the product, caused by water penetration;
− force-majeure (fires, lightning, floods, earthquakes and other natural calamities);
− damage of the product construction by the consumer and third parties;
− malfunctioning and defects, caused by the absence of scheduled maintenance and
inspection of the product;
− completed manual is not provided.
For questions about the service please contact the organization that carried out the installa-
tion of the equipment.
To Next Page
Loading...