Amano MX-300 - Page 10

4
◆ Display when using a programming card, Report/Registration card or totalization card
(PROGRAMMING CARD FOR REGULAR EMPLOYEES #3:
"OVERTIME BEGINNING TIME")
◆ Display when the case top cover is open
(during ribbon cartridge replacement, et al)
(→ page 67)
◆ Display when an error is generated (Ex.: Error E-15)
("Error Codes" → page 64)
◆Display when a parameter error is generated (Ex.: Error P-12)
("Error codes" → page 66)
The top of the display (arrow
pattern ) indicates the item
currently selected.
The bottom of the display (rectangle
pattern ) indicates the type of card
currently being used.
(
The word "OPEN" flashes
)