37
PROGRAMMING FOR HOURLY
WORKERS WITH OPEN SHIFT
····
The following settings are only valid if HOURLY WORKERS WITH OPEN SHIFT is selected
as the calculation mode. (Refer to "How to Change the Calculation Mode" Ö Page 22.) (If
HOURLY WORKERS WITH FIXED SHIFT is selected as the calculation mode, then the
settings in this section will be disabled.)
You can use Programming Card for Hourly Workers with Open Shift 7 to do the following:
How to Use Programming Card for Hourly Workers with Open Shift 7
Configurable/Adjustable Items:
PROGRAMMING CARD FOR HOURLY WORKERS WITH OPEN SHIFT #7: ①Rounding Unit, ②
The Number of Regular Hours ③ Basic Break Hours
For example, if you wanted to go from item ① to item ②, simply press NEXT (button ⑥).
PROGRAMMING CARD FOR HOURLY WORKERS WITH OPEN SHIFT #7
①
② NEXT (button ⑥)
③ NEXT (button ⑥)
④ NEXT (button ⑥)
END (button ⑥)
Insert programming card
Number of Regular Hours
Rounding Unit
Basic Hours for Break 1
Break Hours 2
Exit
To Next Page
Loading...
