69
NO MOISTURE OR
DUST!
INSTALLATION
···········
Installation Precautions
Failure to note the following precautions regarding installation might cause your MX-300 to malfunction.
・Do not install in a location subject to direct sunlight or next to heat generating sources!
・Do not install in a location subject to rain.
・Do not install in a location subject to strong vibrations or direct impact.
・Do not install in a location subject to corrosive gases, steam or salt water damage.
CAUTION
How to Install
If you wish to place the MX-300 on a table, the recommend height is 75 cm.
CAUTION
！
！
NO WOBBLING!
NO DIRECT
SUNLIGHT!
NO STRONG
VIBRATIONS OR
IMPACT!
The MX-300 can also be wall mounted. For instructions on wall mounting, see the next page.
USE A FIXTURE!
To Next Page
Loading...
