Amano MX-300 - IMPORTANT SAFETY OPERATION; WARNING; CAUTION; POWER RELATED PRECAUTIONS

1
IMPORTANT SAFETY OPERATION · ·
To ensure safe operation, please carefully read the following warnings and cautions prior to using the
MX-300.
WARNING
This symbol is used throughout this manual to indicate that misuse may result in
death or serious injury due to electrocution, et al.
■ Do not use a voltage other than the power source voltage specified for use with product.
■ Do not attempt to insert or unplug the power plug with wet hands.
■ Do not place heavy objects on, jam, pull or bend the power cord.
■ Do not remove other than the top cover. (There are high-voltage components inside that can cause
electrocution.)
■ If any abnormality occurs such as heating-up or strange odor emission, or if any foreign matter (metal, water,
liquid) gets inside the MX-300, immediately disconnect the power plug from the power outlet and contact your
local Amano service dealer or representative.
Note: "Serious injury" includes loss of eyesight, burns (of varying severity) , electrocution, bone fracture, poisoning and other
that have serious after-effects or any other injury that requires workers to be hospitalized and/or receive prolonged medical
treatment.
"Personal injury" includes burns, electrocution and other that do not require hospitalization and/or prolonged medical care.
CAUTION
This symbol is used throughout this manual to indicate that misuse can result in
personal injury or damage due to fire, electrocution, et al.
■ Do not use a voltage other than the power source voltage specified for use with product.
■ Do not attempt to insert or unplug the power plug with wet hands.
■ Do not place heavy objects on, jam, pull or bend the power cord.
■ Do not removing anything other than the top cover. (There are high-voltage components inside that can cause
electrocution.)
■ If any abnormality occurs such as heating-up or strange odor emission, or if any foreign matter (metal, water,
liquid) gets inside the MX-300, immediately disconnect the power plug from the power outlet and contact your
local Amano service dealer or representative.
Note: "Damage" includes damage to house, household goods, livestock and pets.
POWER RELATED PRECAUTIONS
■ The power requirements for the MX-300 are AC220 to 240 V ± 10% (50/60Hz). Please use a stable power
supply that matches these requirements.
■ Please provide the MX-300 with a stable and dedicated 24/7 power supply that is not shared with other
devices.
■ The time recorder unit is equipped with a lithium battery. In the event of a power failure, the internal clock will
be maintained by power from the battery. However, the MX-300 is not capable of processing time cards during
a power failure.
■ When performing maintenance that involves opening the time recorder unit's cover (such as replacing the
ribbon cartridge), the operator should ground him/herself to a large metal object (such as a desk). Failure to do
so could result in the time recorder unit malfunctioning.
！
！