・
Do not use a voltage other than the power source voltage specified for use with
product.
Doing so could result in fire or electrocution.
・
Do not overload on one power outlet.
Doing so could result in fire or electrocution.
・
Do not attempt to insert or unplug the power plug with wet hands.
Doing so could result in fire or electrocution.
・
Do not harm or damage any cords, such as power cable, etc.
Also, note that putting a heavy object on them, pulling them or bending them forcibly
will damage the power cables, possibly causing fire or electrocution.
・
Do not dismantle or contact anything unless clearly instructed to in this manual.
There are high-voltage components inside that can cause electrocution.
・
Do not attempt to modify the MX-300 in any way.
Doing so could result in fire or electrocution.
・
If any abnormality is found with the MX-300 such as smoke, strange odor,
heating-up or other, immediately turn off the MX-300's power, disconnect the
power plug from the outlet and contact your local Amano service dealer or
representative.
If you continue to use the MX-300 under such conditions, it could result in fire or
electrocution.
・
If any foreign matter (metal, water, liquid) gets inside the MX-300,
immediately turn off the MX-300's power, disconnect the power plug from the
power outlet and contact your local Amano service dealer or representative.
If you continue to use the MX-300 under such conditions, it could result in fire or
electrocution.
To Next Page
Loading...
