74
Programming Cards and the Special Combination Card
There are four programming cards designed for configuration a variety of settings including setting the
time and date of the MX-300's clock and calendar. Use these cards for making changes to MX-300
parameters. (Refer to pages 16 to 41 for step-by-step instructions to programming methods using the
programming cards.)
In addition, there is a special combination card that can be used for totaling work hours and registering
regular employees. (Refer to pages 52 - 58 for step-by-step instructions for the combination card).
Programming Cards Special Combination Card
Front: REPORT CARD (ON DISPLAY)
& REGISTRATION CARD (REG.
EMPLOYEES) #9
(PREVIOUS PAY PERIOD) #10)
Barcode margin
To Next Page
Loading...
