Amano MX-300 - Page 82

76
PROGRAMMING FOR HOURLY WORKERS WITH FIXED SHIFT
*1: These settings are only valid when 2 - HOURLY WORKERS WITH FIXED SHIFT is selected as the
calculation mode.
Item Your Setting Factory Setting Setting Range
P-21 ROUNDING UNIT 15 minutes 1, 5, 10, 15, 20, 30, 60 / 0 (NO CAL)
P-22
B TIME
ZONE
BEGINNING - -:- - (not configured) 0:00 to 23:59 / - -:- -
END - -:- - (not configured) 0:00 to 23:59 / - -:- -
P-23
C TIME
ZONE
BEGINNING - -:- - (not configured) 0:00 to 23:59 / - -:- -
END - -:- - (not configured) 0:00 to 23:59 / - -:- -
P-24
D TIME
ZONE
BEGINNING - -:- - (not configured) 0:00 to 23:59 / - -:- -
END - -:- - (not configured) 0:00 to 23:59 / - -:- -
P-24
# 1 FIXED
BREAK
BEGINNING - -:- - (not configured) 0:00 to 23:59 / - -:- -
END - -:- - (not configured) 0:00 to 23:59 / - -:- -
P-26
# 2 FIXED
BREAK
BEGINNING - -:- - (not configured) 0:00 to 23:59 / - -:- -
END - -:- - (not configured) 0:00 to 23:59 / - -:- -
P-27
# 3 FIXED
BREAK
BEGINNING - -:- - (not configured) 0:00 to 23:59 / - -:- -
END - -:- - (not configured) 0:00 to 23:59 / - -:- -
P-28
# 4 FIXED
BREAK
BEGINNING - -:- - (not configured) 0:00 to 23:59 / - -:- -
END - -:- - (not configured) 0:00 to 23:59 / - -:- -
PROGRAMMING FOR HOURLY WORKERS WITH OPEN SHIFT
*1: These settings are only valid when 3 - HOURLY WORKERS WITH OPEN SHIFT is selected as the
calculation mode.
Item Your Setting Factory Setting Setting Range
P-31 ROUNDING UNIT 15 minutes 1, 5, 10, 15, 20, 30, 60 / 0 (NO CAL)
P-32
NUMBER OF REGULAR
HOURS
0:00
0:00 (not configured) / 0:01 to
23:29
P-33
BASIC HOURS FOR BREAK 1 - -:- - (not configured) 0:00 to 23:59 / - -:- -
BREAK TIME 1 - -:- - (not configured) 0:00 to 23:59 / - -:- -
P-34
BREAK HOURS 2 - -:- - (not configured) 0:00 to 23:59 / - -:- -
BREAK TIME 1 + 2 - -:- - (not configured) 0:00 to 23:59 / - -:- -
PROGRAMMING FOR TIME SIGNAL SCHEDULES
Step
No.
Days
Time Setting Range
MO TU WE TH FR SA SU
01
:
02
:
03
:
Days : ON = Enable, OFF = Disable
…………・
:
Time : 00:00 - 23:59. - - : - - (deactivattion)
:
:
19
:
20
:
ON ON ON ON ON OFF OFF
- - : - -
(Default Setting)