Ametek AMEVision - Controller;Interface; Amevision Software Display and Keypad; Amevision Display Screen; Amevision Keypad

Controller/Interface | 2-1
PN 9000-165-VE, Rev P
Controller/Interface
The AMEVision Display User Interface provides the capability to easily cong-
ure, calibrate, and monitor up to four (4) WDG-V Analyzers. A two-wire Modbus
RTU interface connects the AMEVision to each WDG-V Analyzer. The AMEVision
provides the following communication interfaces: Modbus RTU, web interface
(TCP/IP), and USB ash drive capabilities for uploading/downloading data and
rmware upgrades.
AMEVision Software Display and Keypad
• 4.2" color, 1/4 VGA display
• 19-key keypad
• Web interface (TCP/IP) and MODBUS (RTU)
• Trend Data Logging/Charting screen
• USB port inside for rmware downloads and data uploads
AMEVision Display Screen
The menu display is a two dimensional
graphical user interface accessed using
the Navigation Arrows and ENTER/MENU.
These keys allow you to navigate through
the icons and to select the menu option
needed.
AMEVision Keypad
The AMEVision is operated by pressing the
arrows and buttons on the keypad. ENTER/
MENU selects the option on the screen
and CANCEL exits the option. The numeric
keypad is used to enter information in the
elds. Navigation arrows are used to move
throughout the display.