Ametek AMEVision - Alarms and Warnings; Alarms

PN 9000-165-VE, Rev P
Alarms and Warnings
Alarms
Use this menu to view alarms that are currently active and also to view a his-
tory of alarms.
Alarm parameters are set during the conguration process under the
Alarm Conguration menu.
1. From the Main Menu screen, press ENTER/MENU to access
the Menus.
2. Press the Left or Right arrows to locate the Alarms menu and press
ENTER/MENU.
3. Two menu options are visible:
1. Currently Active List of all current alarms
2. Alarm History
Green
Red
Yellow
Blue
List of status and information changes
Cleared alarms
Fail Status
Warning
Normal
Up to 1000 past events under Alarm History can be viewed with 11 events per page.
For a complete listing of possible alarms, descriptions, and possible
causes, see "Alarm and Status Denitions" later in this chapter.
Alarms and Warnings | 3-1