PN 9000-165-VE, Rev P
Diagnostics
Diagnostics are used to help determine the overall health of the sensor as well
as for basic troubleshooting in the unlikely event that there is a problem with
the analyzer. These screens display important information about how the ana-
lyzer is running and where problems may occur. Diagnostics also provide the
ability to test customer I/O such as analog outputs and relay outputs providing
information that is useful when troubleshooting the interface to the distrib-
uted control system (DCS).
1. From the Main Menu screen, press ENTER/MENU to access
the Menus.
2. Press the Left and/or Right arrows to locate the Diagnostics menu and
press ENTER/MENU.
There are seven Diagnostic menus:
• Sensor Diagnostics
• Control Diagnostics
• Inject Gas
• Trend Logging
• Cell Diagnostics
• Combustible Detector
• CH4 Detector
3-2 | Thermox
®
AMEVision Display User Interface
To Next Page
Loading...