Ametek AMEVision - Process Pressure

PN 9000-165-VE, Rev P
4. Press ENTER/MENU to select each option. To deselect the option, press
ENTER again.
5. Use the arrow keys to view the options. When you have made your selec-
tions, navigate to ACCEPT and press ENTER/MENU. Selected options are
indicated by an ‘X’ in the check box.
The sensor you have selected on the HOME screen is the only sensor
whose functions and process will be displayed on the AMEVision
menus. To view additional sensor setups, you must rst select that
sensor on the HOME screen.
Process Pressure
Dene your process pressure and whether your process is operating under
a positive or negative pressure. Setting this value corrects oxygen measure-
ments for the dened pressure.
1. From the Main Menu screen, press ENTER/MENU to access the Congu-
ration Menu.
2. Press the Left or Right arrows to locate the Process Pressure menu and
press ENTER/MENU.
3. Enter the process pressure.
4. Navigate to the ACCEPT button and press ENTER/MENU to accept your
entry.
To enter a negative process pressure, use the minus (‘-’) key on the
AMEVision keypad before entering the number.
Figure 2-8.
Process Pressure screen.
2-10 | Thermox
®
AMEVision Display User Interface