PN 9000-165-VE, Rev P
Inject Gas
Press the Left or Right arrows to locate the Inject Gas menu and press ENTER/
MENU. Use this menu to test the ow of gas to the analyzer.
1. Use the arrows to select the gas to inject and press ENTER/MENU. An “X”
appears in the check box of the option selected.
2. Select the START button and press ENTER/MENU to inject the gas.
Figure 3-4.
Inject Zero Gas screen
(Diagnostics Mode).
Pressing ENTER/MENU to start the test will turn on the
Diagnostics Mode.
3. Press ENTER/MENU to end the test and return to the Inject Gas screen. It
will also turn Diagnostics Mode O.
4. Press CANCEL to exit from the menu.
3-6 | Thermox
®
AMEVision Display User Interface
To Next Page
Loading...