Ametek AMEVision - File Name Format for Uploaded Files

PN 9000-165-VE, Rev P
File Name Format for Uploaded Files
Analyzer Name Month (2) Day (2) Year (4) Hour (24) Minute (2) Second (2) _Interval 1,2,3 (.csv)
WDG1 August 21st 2012 1 PM 27 min 41 sec Interval 1
WDG1 08 21 2012 13 27 41 _Int1.csv
WDG108212012132741_Int1.csv
Interval (1,2,3)
Three (3) les are stored on the ash drive when you upload les, one
for each interval. The lenames end with the specic interval (i.e., Int1,
Int2, Int3).
The extension for uploaded Sensor Parameter les is .csv.
If the upload was not successful, a large RED 'X' will appear on the
display with the message “Failed.” You will be asked if the USB was
plugged in. Check the USB drive to make sure it is connected and try
again. If you continue to fail to upload the Sensor parameters, contact
AMETEK customer service.
6. Press CANCEL to exit the menu.
Alarms and Warnings | 3-15