Ametek AMEVision - Configuration Menu

PN 9000-165-VE, Rev P
Conguration Menu
Analog Output Dene parameters that control analog current outputs.
Sensor Conguration Dene the type of sensor you are using and the gases
to be measured.
Alarm Conguration Dene parameters that control the alarm relays.
Communications Dene AMEVision communication parameters. Select
TC/IP or modbus function.
Process Pressure Select a positive or negative process pressure. Enter
process pressure value.
System Time Set system and display time in 24-hour format.
Passcode Conguration Create a system password to limit control unit access.
Sensor Name Conguration Name sensor and connected sensors in a multiple-
analyzer conguration.
Selecting Menu Options
Press ENTER/MENU on the AMEVision keypad.
Setting Menu Options
To accept changes you have made press ENTER/MENU.
Exiting Menu Options
Press CANCEL on the AMEVision keypad.
Figure 2-2.
Sensor Conguration menu.
2-4 | Thermox
®
AMEVision Display User Interface