M19-2101 REVISION 2.0 DVNEXT RHEOMETER - OPERATIONAL MANUAL
Figure 2-15
Figure 2-16
Clear: Clear all data that has been entered into the test parameters and restore the
values to the factory default.
Save: Save the current test.
Run: Run the current test.
Test Parameter area includes many elements of the viscosity test as well as live measurements of Torque % and
Temperature. Temperature data will only be displayed if a AMETEK Brookfield temperature probe is connected to the
DVNext Rheometer.
Torque: A live signal from the rheometer.
un.
To Next Page
Loading...
