M19-2101 REVISION 2.0 DVNEXT RHEOMETER - OPERATIONAL MANUAL
5.4 Administrator account and admin functions
The DVNext device comes with one default account, the Administrator. This account has access to the Admin
Functions sub menu, which allows the Administrator to change the various settings and parameters of the device.
The functionality of the Administrator account and the Admin Functions menu will depend on the edition of the
DVNext device (Compliant Edition vs Standard Edition).
5.4.1 Scanning accessory barcodes (compliant instruments only)
The DVNext is available in two dierent versions: Compliant and Standard. As previously stated in Section 5, the
administrator functions are dierent between these two versions, so it is very important to identify the version that is
being used. The model number is located on the back of the device can be used for identification. The 9th digit
of the model number signifies the edition of the device, and can be one of the following:
DVNX****C – Compliant Edition DVNext device
DVNX****G – Standard Edition DVNext device
This can also be found in the “Model” section on the device on the startup splash screen and the “about” page. The
dierent models can be seen below in Figure 5-11, with the Compliant Edition shown on the left and the Standard
Edition shown on the right.
Figure 5-11
Aside from the dierence in model numbers on the device, there are several other dierences that can help identify
between the Compliant and Standard Edition DVNext devices. On the Compliant Edition DVNext, there will be a login
button shown on the top left of the main menu screen. On the Standard Edition, no such button will appear. See
Figure 5-12, with the Compliant Edition main menu shown on the left and the Standard Edition shown on the right.
Figure 5-12
On the Compliant Edition DVNext, the administrator account is automatically logged in when the device is powered
up. The default is no login required (See section 5.4.2). When log in is set to required, the user can log into the
administrator account with the default password. By default, the administrator password is “admin”. After logging into
the administrator account for the first time when requiring login, the user will be required to set a new password for
the administrator account.
To Next Page
Loading...
Need help?
General
