M19-2101 REVISION 2.0 DVNEXT RHEOMETER - OPERATIONAL MANUAL
Post Test Averaging • •
Instructions • •
Save Path • •
Yield Test
Setup
Set Spindle • •
Immersion Mark • •
Pre-Shear Speed • •
Pre-Shear Time • •
Wait Time • •
Run Speed • •
Zero Speed • •
Torque Reduction • •
Yield Limits • •
Temperature Setpoint • •
Graph Axes • •
Instructions • •
Save Path • •
Table 5-1: Factory Default User Settings (continued from previous page)
5.4.5 Set Time and Date
The Time and Date is displayed on the Status Bar at the top of every screen. These parameters are set within the
Set Time and Date menu. The format for setting Time and Date will be based on the Regional Settings. To set Time
and Date, touch the preferred field to display the Number Keypad. When both Date and Time are set correctly for
your location, press OK to accept the change.
5.4.6 Manage data
The DVNext has all the data management options located conveniently under one menu. These options are:
- Backup
- Export Results
- Archive
- FTP Settings
Details of these options can be found below in their respective sections.
Backup
Create a backup file from the DVNext internal memory including: Settings, User Profiles, Results, and Tests. This
backup file is saved to a USB Flash Drive and can be uploaded (Restore) to any DVNext Rheometer.
Automatic Backup: The backup sub-menu also contains the automatic backup option. Create Backup files according
To Next Page
Loading...
Need help?
General
