M19-2101 REVISION 2.0 DVNEXT RHEOMETER - OPERATIONAL MANUAL
in Report, Post Test Averaging can be selected from the Down Arrow in the Results screen.
Post Test Averaging oers two options: Step Averaging and Test Averaging (see Figure 3-48).
Step Averaging
Calculate Average and Standard Deviation for all data collected within a single step test. Step Averages will be
displayed as shown below in Figure 3-49
Test Averaging
Calculate Average and Standard Deviation for all data collected within step specified. Test Averages will be displayed
as shown below in Figure 3-50.
Figure 3-48 Figure 3-49
Figure 3-50
To Next Page
Loading...
Need help?
General
