Ametek Mocon Dansensor LeakPointer 3 User Manual

46 User Guide EN Dansensor® LeakPointer 3/3
+
P/N 380064-F
06/2021
11. Tap the yellow icon to open the test measurement function.....
...then close the chamber to start the measurement.
12. When the test is completed...
...verify that the measured ΔP is very close to the values as obtained earlier.
13. Tap the icon to exit and return to the product settings.

Ametek Mocon Dansensor LeakPointer 3 Specifications

General

Brand	Ametek
Model	Mocon Dansensor LeakPointer 3
Category	Test Equipment
Language	English