Ametek Mocon Dansensor LeakPointer 3 - Export

80 User Guide EN Dansensor® LeakPointer 3/3
+
P/N 380064-F
06/2021
Export
Selecting Export from the Settings menu will display a screen showing the various
export functions.
NOTE! The export functions requires that you insert a USB-stick in one of the
device’s USB-ports (labelled ).
NOTE! We recommend to use the various export functions to make backups
regularly so that files can be restored in case of a PCB breakdown.
The functions marked with an asterisk (*) can for example be used to clone another device.
The export function creates the following folders/files on the USB-stick:
The file export format for the log files is *.csv (Comma Separated Values). This format can be
imported into a spreadsheet. The actual used separator is “;” (semicolon).

Measurement log files are named <serial no.>_MeasurementLog_<date>.csv and Error and
Event log files are named <serial no.>-<date>-ErrorAndEventLog.csv.
Other files are exported as binary files and named products_customfields, setup and users
respectively. These files can not be edited.
Export Measurement Log Exports all measurement data logs
Export Error/Event Log Exports error/event logs
Export Workflows * Exports the workflow database
Export Users * Exports the user database
Export Settings * Exports all settings from the Settings menu
OHDNSRLQWHU
ORJV
B0HDVXUHPHQW/RJBFVY
(UURU$QG(YHQW/RJFVY
SURGXFWVBFXVWRP¿HOGV
VHWXS
XVHUV