Ametek Mocon Dansensor LeakPointer 3 User Manual

76 User Guide EN Dansensor® LeakPointer 3/3
+
P/N 380064-F
06/2021
Test & Adjustments
The Test & Adjustments functions can be used to perform various tests.
System Test
The System Test function can be used to test the main functions of the device.
Package pressure (U1) Shows the pressure difference between the chamber and inside a
package when package is connected to the DeltaP connector in
the chamber.
Sensor Pump pressure
(U2)
Shows the pressure difference between the exhaust of the sensor
pump and the surrounding area.
Atmospheric Pressure Shows the currently measured atmospheric pressure.
System Test Opens the System Test screen.
See "System Test" on page 76 for details.
Create Test Vacuum Opens the Create Test Vacuum
See "Create Test Vacuum" on page 78 for details.
Adjustments Only available for Service Technicians.

Ametek Mocon Dansensor LeakPointer 3 Specifications

General

Brand	Ametek
Model	Mocon Dansensor LeakPointer 3
Category	Test Equipment
Language	English