Ametek Mocon Dansensor LeakPointer 3 User Manual

66 User Guide EN Dansensor® LeakPointer 3/3
+
P/N 380064-F
06/2021
Access levels
The various access levels and the associated rights are described below:
NOTE! A higher level of access always has all rights from lower access levels.
Supervisor login
At start-up when user login is required and you are logged in either by selecting a user from
the
User Login list or by entering a valid User ID whatever is required, even users created
with Supervisor access will also only have Operator access at this point.
To obtain Supervisor rights, you must log in again via Main Menu -> Access -> User
Login with a valid User ID.
Standard Test
Operator
Basic user.
 Can only perform tests on workflows/products marked as
Standard Test.

If Use State Mark is enabled in Settings -> Device the access
is limited to Standard Test products/workflows marked with
State = Current.
 Cannot change any settings.
Operator Normal user.
 Can perform tests using all products/workflows with
State = Current.
 Cannot change any settings.
Supervisor Daily administrator of products/workflows and standard users.
 Has access to all products/workflows.
 Can create products/workflows and edit custom fields.
 Can create Standard Test Operator and Operator users, but not
other Supervisor users.
 Can access the System Test and Create Test Vacuum functions
from the Service -> Test & Adjustment menu.
 Can export measurement logs and error/event logs.
 Cannot change settings in the Settings menu.
Administrator Device administrator.
 Can change settings in the Settings menu (except for the
Service menu).
 Can create Supervisor users.
 Can remove access to Service login.
 Can export and import all data.
Service Service Technician.
 Can access all settings in the Settings -> Service menu.
 Can access all functions in the Service -> Test & Adjustment
menu.

Ametek Mocon Dansensor LeakPointer 3 Specifications

General

Brand	Ametek
Model	Mocon Dansensor LeakPointer 3
Category	Test Equipment
Language	English