Upgrading Modero Firmware
109
VG Series Modero Touch Panels
4. If the panel firmware being used is not current, download the latest Kit file by first logging in to www.amx.com and
then navigate to Tech Center > Firmware Files and from within the Modero section of the web page locate your
Modero panel.
5. Click on the desired Kit file link and after you’ve accepted the Licensing Agreement, verify you have downloaded
the Modero Kit file to a known location.
6. From within Studio, select Tools > Firmware Transfers > Send to NetLinx Device from the Main menu to open
the Send to NetLinx Device dialog (FIG. 95). Verify the panel’s System and Device number values match those
values listed within the System folder in the OnLine Tree tab of the Workspace window.
7. Select the panel’s KIT file from the Files section (FIG. 95).
8. Enter the Device value associated with the panel and the System number associated with the Master (listed in the
OnLine Tree tab of the Workspace window). The Port field is greyed-out.
FIG. 94 NetLinx Workspace window (showing connected Modero panel)
Showing a Master
firmware version and
device number
Showing the current Modero
panel firmware version and
device number
Shows NetLinx Studio
version number
The panel firmware is shown on the right of the listed panel.
FIG. 95 Send to NetLinx Device dialog (showing Modero firmware update via IP)
Selected Firmware file
Description field for selected KIT file
Device value and System number
must match the values
listed in the Workspace window
Firmware download
status
To Next Page
Loading...
