Firmware Pages and Descriptions
118
VG Series Modero Touch Panels
Project Information Page
The Project Information page displays the TPDesign4 (TPD4) project file properties currently loaded on the selected
Modero panel (FIG. 103). Refer to the TPDesign4 Touch Panel Program instruction manual for more specific
information on uploading TPDesign4 files to a panel.
The elements of the Project Information page are described in the table below:
Panel Information Page Elements (Cont.)
High Level: Displays the high level (level count) value being used by the panel.
Serial Number: Displays the specific serial number value assigned to the panel.
Setup Pages Version: Displays the type and version of the Setup pages being used by the panel.
Screen Width: Displays the pixel width being used to display the incoming video signal on the Modero panel.
• Maximum available screen width on 12" panels is 800 pixels.
• Maximum available screen width on 15" panels is 1024 pixels.
• Maximum available screen width on 17" widescreen panels is 1280 pixels.
Screen Height: Displays the pixel height being used to display the incoming video signal on the Modero panel.
• Maximum available screen height on 12" panels is 600 pixels.
• Maximum available screen height on 15" and 17" panels is 768 pixels.
Screen Refresh Rate: Displays the video refresh rate applied to the incoming video signal from the panel.
Screen Rotation: Displays the degree of rotation applied to the on-screen image.
Power Up Pages: Displays the first touch panel page assigned for display after the device is powered-up.
• This information is taken from the TPD4 project file.
• Most projects begin with a Main page.
Start Up String: Displays the start-up string.
Wake Up String: Displays the wake up string used after an activation from a timeout.
Sleep String: Displays the sleep string used during a panel’s sleep mode.
File System: Displays the amount of Compact Flash memory available on the Modero panel.
RAM: Displays the available RAM (or Extended Memory module) on the Modero panel.
Panel Start Time Displays the last time the panel was started from an "Off" state.
FIG. 103
Project Information page (shown taking information form TPD4 project file)
Project Information Page Elements
Back: Returns you to the previously active touch panel page.
Connection Status icon: This visual display of the connection status allows the user to have a current visual update of
the panel’s connection status regardless of what page is currently active.
• A Lock only appears on the icon if the panel has established a connection with a currently
secured target Master (requiring a username and password).
File Name: Displays the name of the TPDesign4 project file downloaded to the panel.
Designer ID: Displays the designer information.
Sample TPD4 Project Wizard dialog
To Next Page
Loading...
