Firmware Pages and Descriptions
126
VG Series Modero Touch Panels
Adjusting the Incoming Signal on the RGB Settings Page
After opening the RGB Settings page, if the NXA-RGB is receiving an RGB signal, this signal is then displayed within
the incoming signal area. By pressing within this area, you are provided with a more accurate method of altering the
incoming RGB signal by viewing it at full-screen resolution and activating only specific RGB configuration pop-ups.
To adjust these properties:
1. Press the incoming signal area of the RGB Settings page to launch the Full Screen Edit mode, display the incoming
image at full screen, and place a grey RGB Adjustments bar on the bottom of the screen.
2. Press this grey bar to maximize the RGB Adjustments popup menu (FIG. 110) which provides you with much more
accurate adjustments of the incoming signal properties. This menu can be dragged across the screen for a better
view of the underlying image. Once you exit this menu, the grey bar is positioned back onto its original location.
Although these same options are available within the main RGB Settings page, these RGB image controls
provide you with UP/DN arrows for accurate value entry adjustments. These controls allow you to set the
RGB properties of the incoming image/video on the NXA-RGB.
3. Use the UP/DN Phase buttons to alter the RGB tracking/signal level of the incoming image/video. These values
cycle back thru 0 and on after reaching 31.
4. Use the UP/DN H Position buttons (from the RGB Geometry popup dialog) to adjust the horizontal location and
move the image (left-right) on the screen. These values cycle back thru 0 and on after reaching 255.
5. Use the UP/DN H Size buttons (from the RGB Geometry popup dialog) to adjust the horizontal height and stretch
the image on the screen. These values cycle back thru 0 and on after reaching 255.
6. Use the UP/DN V Position buttons (from the RGB Geometry popup dialog) to adjust the vertical location and move
the image (up-down) on the screen. These values cycle back thru 0 and on after reaching 255.
RGB Settings Page Elements (Cont.)
Full Screen Edit Mode: Pressing the incoming signal area (FIG. 109) activates the Full Screen Edit mode. The on-
screen popup provides each field with UP/DN buttons to more accurately adjust the
values for all of the above mentioned RGB parameter fields.
• This mode causes the incoming signal to be displayed at full screen and places an RGB
Adjustments bar on the bottom of the screen.
• Pressing the bar launches a draggable popup of the RGB adjustment section over the full
screen image.
• This popup allows you to view a full-screen version of the signal and alter it without having
the image blocked by displaying only individual RGB adjustment dialog and specific RGB
configuration pop-ups.
FIG. 110
Full Screen Edit Mode - showing controls
Incoming RGB signal
On-screen image controls
(activated by pressing
the RGB Adjustments bar)
Once done making your screen
adjustments, SAVE SETTINGS.
One of the first things to look at when trying to adjust your image, is the Phase value.
Adjustments to this value can help troubleshoot most image issues.
To Next Page
Loading...
