Why grabber collides with bales on Anderson Utility Vehicle?
If the pusher frame of your Anderson Utility Vehicle does not push the bales far enough and the grabber collides with them when loading new bales, it means the pusher frame’s travel limit stop is not adjusted to the bale width. Use the other adjustment available for the travel limit.
What causes bales to collide with barrier on Anderson Utility Vehicle?
If the bales collide with the barrier on your Anderson Utility Vehicle, it's because the barrier is too high, the arm is too low, or the barrier and arm height are not adjusted to the bale height. Correct the barrier or arm height, or both.
Why unloading platform doesn't move on Anderson Utility Vehicle?
If the unloading platform of your Anderson Utility Vehicle does not move, the tractor’s oil feed system may be defective; correct the hydraulic hose fittings if necessary. Additionally, the loading arm safety device tap rod (diverter valve) might not be working; ensure it can move freely and is correctly adjusted.
What to do if loading arm grabber doesn't pivot on Anderson Utility Vehicle?
If the loading arm grabber of your Anderson Utility Vehicle does not pivot, but the other controls operated by the control lever work, there may be a problem with the electric wires or connectors; check their condition and replace any damaged parts. Also, an obstacle might be preventing pivot movement; remove any obstacles from the grabber’s trajectory.
Why loading arm grabber won't open on Anderson Utility Vehicle?
If the loading arm grabber of your Anderson Utility Vehicle does not open, but the other controls operated by the control lever work, there may be a problem with the electric wires or connectors; check their condition and replace any damaged parts. Also, an obstacle might be preventing the grabbers from moving; remove any obstacles from the grabbers’ trajectory.
Why pusher frame doesn't return automatically on Anderson Utility Vehicle?
If the pusher frame of your Anderson Utility Vehicle does not return automatically, the electrical connection may be defective; check the connection and make any required changes. Additionally, the pusher frame’s central stop position and return sensor might be poorly adjusted or broken; ensure the sensor is correctly adjusted and in good condition. Adjust it as needed or replace it if it is no longer functional.
General| Brand | Anderson |
|---|---|
| Model | TSR-3450 |
| Category | Farm Equipment |
| Language | English |
To Next Page
