Medium-consistency pump MC
STANDARD, C-01-000000
Rev. 0, 2010.02.09 SAFETY Kap.2 , Seite 7 of 20
GRZ-2698567-v1-Safety.FM
Indicative, warning
and prohibiting
signs
Indicative, warning and prohibiting signs must be observed. They must be
checked regularly for legibility and completeness and they must not be
removed or obstructed.
The following indicative, warning and prohibiting signs are attached to the
machine.
Chemicals:
If the pump is used in the chemicals sector, the operator must mount
appropriate safety instructions on the plant.
Examples of signs required where chemicals are used:
Hot surface Prohibiting sign at standpipe’s manhole
Burn hazard, pressurized steam
Warning against toxic
substances
Caustic substances Risk of oxidising
substance
Do not open during
operation and
without written
permission.
To Next Page
Loading...
