Medium-consistency pump MC
STANDARD, C-01-000000
Rev. 0, 2010.02.09 MAINTENANCE Kap.7 , Seite 6 of 22
GRZ-2698573-v1-Maintenance.FM
7.6 Lubrication
7.6.1 Oil lubrication
Lubricating oil brands
CAUTION
During works assembly the bearings and the oil chamber are filled
with a preserving oil providing protection for approximately 6
months.
Before start-up, oil must be filled up to the middle of the oil
inspection glass according to the table (
Tab. 7-6).
There is no need to remove the preserving oil.
Lubricating oils
Viscosity: 64 cST at 40°C (ISO VG68)
Manufacturer Type
BP BP Energol HLP 68
Esso Teresso 68
Mobil D.T.E. Heavy Medium
Shell Shell Tellus Oil S 68
Castrol Hyspin AWS 68
Tab. 7-6 Lubricating oil brands
WARNING
In case the surface temperature of the bearing housing rises above
60°C, Andritz AG should be consulted.
CAUTION
Bearing damage may be caused by using the wrong oil!
Use only oil grades according to Tab. 7-6.
Do not mix different brands or grades of oil.
To Next Page
Loading...
