Medium-consistency pump MC
STANDARD, C-01-000000
Rev. 0, 2010.02.09 ERECTION WORK and TRANSPORT Kap.4 , Seite 2 of 12
GRZ-2698569-v1-Erection.FM
4.3 Haulage
Delivery The medium-consistency pump is supplied pre-assembled. Machine
components and auxiliary materials are packed in crates.Transport sizes
and weights are stated in the shipping documents.
Acceptance • Check whether supply is complete (against shipping documents and
packing lists) and in perfect condition.
• In the event of transport damage or short supply, do not accept goods
but notify forwarder and ANDRITZ AG's shipping department.
• If there is a hidden defect or any damage, notify forwarder and
ANDRITZ AG's shipping department within two weeks.
Haulage of the
standpipe
The standpipe ca be hauled either with belts and nooses or with shackles
(shown in the picture below). Stability of the pump can be guaranteed up
to an incline of 10°
Abb. 4-1 Haulage of the standpipe
DANGER
During transport of the medium-consistency pump or
loading/unloading (pump may fall).
The loading equipment must bear the name of the manufacturer, the
type of material and the permitted load!
Do not lift machine and transport crates except at the points marked
for lifting by crane or forklift.
Do not step or walk below suspended loads.
To Next Page
Loading...
